Categories: Industrial Plant Disposal

Industrial Generators, Gas and Oil – Removal and Decommissioning

Industrial Gas and Diesel Generators Removal and Decommissioning

Industrial Generators, Gas and Oil – Removal and Decommissioning

Industrial Disposal / Boiler & Plant Dismantlers are specialists in the decommissioning, removal or re-location of all types of industrial generators.

Whatever their weight, size, quantity and wherever they are situated, we can provide the appropriate plant, machinery and qualified manpower to move them.

Primarily, we operate in the London, Essex, Kent, Surrey, Sussex, Bedfordshire and Hertfordshire, yet have the capacity to cover the UK.

Unique Approach

  • We understand that each task requires a unique approach and we will undertake careful analysis of your specific project to establish the most straight forward cost effective way forward.
  • We can decommission Generators for you and any associated fuel feed tanks prior to removal. Decommissioned plant will be extracted from its location, and craned to either its new location, or loaded onto one of our low-loaders for transportation from site.
  • We can ensure that no unscheduled power failure will occur during the decommissioning process

Large generators 

Easily accessible

  • We provide CPA (Construction Plant-Hire Association) and Contract Lift cranage to lift plant in its entirety
  • Lifting Plans and Insurance Certification will accompany the Cranage throughout the process
  • On-site Lifting Supervisors will be in attendance throughout

Difficult access

  • On occasion it might be necessary to deconstruct and rebuild the walls of the generator room which we can also undertake as part of our complete service to you..

Generators with associated Fuel Tanks

Should associated fuel tanks also need removal, we have the services to accommodate this too.

Oil and sludge residues will be emptied and transported from site to licensed depots for specialised handling. Hazardous Waste Transfer Notes will be issued for your record keeping as confirmation of your compliance with Environmental Agency regulations.

  • Large tanks: Man access will be necessary and our qualified operatives use certificated safety equipment and breathing apparatus to purge and clean them. Tanks and pipe-work will then be gas freed.
  • The cleaning process is monitored externally throughout by our designated top-man operative.
  • Tanks in areas of limited working space are cut into hand-manageable pieces to facilitate transference to vehicles for removal.
  • Each operative holds Confined Space CSCS/CTCS certification.
  • Gas-free Certificates are issued once safe oxygen level metering is achieved.
  • Small tanks: We can clean tanks from the outside by cold cutting access holes for the jetting equipment and implement our specialised cleaning techniques.

Generators of commercial value

We may offer a reduction in costs in exchange for the value of the plant being removed.

Safety of our operatives

We will work in accordance with site guidelines and the Personal Protective Equipment at Work Regulations 2002 to reduce the risks to employees as far as is reasonably practicable.

Contact us for your one-stop solution

Wherever you are located in the UK, you will find that our efficient system is simple and easy to use.

  • You can either call us on 020 7183 3222 to arrange a site visit with one of our engineers to discuss your requirements, or
  • Please click on the CONTACT US button above to send your enquiry through to  enquiries@industrialdisposal.net

 

  • Following a site visit, we will provide you with our:
    • written quotation outlining the methods of works and price breakdown
    • Risk Assessment and Method Statement [RAMS], which is a mandatory requirement of the Health & Safety executive
    • Operatives certifications (copies)
    • Contractors Public and Employee liability Insurance (copy)
  • Your approval of these documents will demonstrate our mutual commitment to our environmental responsibilities in undertaking your task.

Documentation upon completion

  • You will be issued with your Gas-free certificate where tank work is involved and the appropriate Waste Transfer Notes.
  • Thank you for entering this website.
  • Assuring you of our best attention, Industrial Disposal.

Industrial Boiler Removal

Industrial Boiler Removal & Dismantling

For details of our Tank Removal Services please click here.

Industrial Disposal / Boiler & Plant Dismantlers are specialists in the removal of all types of industrial steam and hot water boilers. Whatever the size and quantity, and wherever the boilers are situated, Industrial Disposal will provide the  plant, machinery and qualified manpower to remove them.

We operate industrial boiler removal and dismantling services around the UK, but primarily in London, Essex, Kent, Surrey, Sussex, Bedfordshire, and Hertfordshire. Please contact us to discuss your tank cleaning requirements.

Our services also extend to the:

  • dismantling of plant rooms, and the
  • purchasing of redundant boilers of further commercial value. We will visit you on site to discuss your potential sale and provide you with an immediate indication of price.

Budget and Deadline

Each clearance project requires careful analysis to establish the most cost effective and efficient method of works to suit your time-deadline and budget.  We will offer on-site comprehensive advice and options, followed by a written quotation for your consideration.

Reputation and experience:

We have earned our valued reputation from satisfied clients over many years in providing our quality boiler removal services to:

Hospitals – Factories – Power stations – Oil refineries – Military sites – Industrial laundries

Easily Accessible Boilers

Package boilers which are situated in easily accessible locations can be removed using our skating and winching equipment. We will provide lifting plans, craneage and appropriate transport to remove plant from site.

Restricted Access

Where boilers are housed in areas with restricted access, for example in a basement, we will use our specialised cold cutting or flame cutting equipment to cut them into sizeable pieces for removal.

On occasion, it could be necessary to deconstruct and rebuild boiler house walls, all of which Boiler and Plant will undertake as part of our complete service to you.

Safety of our operatives

Priority is given to the safety of our operatives and the neighbouring working environment at all times. Each operative is trained and certificated to work in Confined Spaces.

We will work in accordance with your site guidelines and the Personal Protective Equipment at Work Regulations 2002 to reduce the risks to employees as far as is reasonably practicable.

All methods of work will be in compliance with the industry’s stringent safe working practices, as legislated.

Contact us for your one-stop solution

Wherever you are located in the UK, you will find that our efficient system is simple and easy to use.

  • Call us on 020 7183 3222 to arrange a site visit with one of our engineers to discuss your requirements
  • Following the meeting, we will provide you with our:
    • written quotation outlining the methods of works and price breakdown
    • Risk Assessment and Method Statement [RAMS], which is a mandatory requirement of the Health & Safety executive
    • Operatives certifications (copies)
    • Contractors Public and Employee liability Insurance (copy)
  • Your approval of these documents will demonstrate our mutual commitment to our environmental responsibilities in undertaking your task.

Thank you for entering this website.

Assuring you of our best attention, Industrial Disposal.

Oil Tank Removal, Decommissioning & Disposal

Oil Tank Removal, Decommissioning & Disposal

For details of our Tank Cleaning Services please click here. Please visit our Industrial Plant Disposal Projects page for recent decomissioning projects.

Complete one-stop service

Industrial Disposal are specialists in all types of industrial tank removal and decommissioning.

Whatever the tank sizes and wherever they are situated, Industrial Disposal has the know-how, manpower, plant and machinery to remove them.

We operate oil tank removal, tank decommissioning and disposal services around the UK, but primarily in London, Essex, Kent, Surrey, Sussex, Bedfordshire, and Hertfordshire. Please contact us to discuss your oil tank removal and oil tank decommissioning requirements.

Unique approach

We understand that each task requires a unique approach and we will undertake careful analysis of your specific project to establish the most straight forward cost effective way forward.

  • Large and easily accessible tanks which have been fully decommissioned will be extracted from their location, and craned onto one of our low-loaders for transportation from site.
  • Where tanks cannot be accessed for uplifting as whole units, our operatives will decommission, empty, gas-free and cut them into manageable pieces for removal from site.
  • We use the latest cold cutting and flame cutting equipment appropriate to the location of the tanks. We maintain a constant awareness of working within hazardous environments and other potentially hazardous neighbouring plant
  • All operatives are experienced in Confined Space work and hold relevant certification
  • A Gas-Free certificate is issued for each tank we decommission

Difficult access – It could be necessary on occasion to deconstruct and rebuild tank room walls which we at Boiler and Plant will also undertake as part of our complete service to you.

Safety of our operatives

All internal tank work is constantly monitored by an external ‘top-man’, using the latest safety equipment and breathing apparatus.

We will work in accordance with your site guidelines and the PPE at work Regulations 2002.

Legislation dictates that every stage of the process must comply with the stringent regulations of the Environment Agency and the Industry’s Health and Safety Executive.

Contact us for your one-stop solution

Wherever you are located in the UK, you will find that our efficient system is simple and easy to use.

  • Call us on 020 7183 3222 to arrange a site visit with one of our engineers who will discuss your disposal and/or cleaning requirements
  • We will provide you with our:
    • quotation outlining the tasks be undertaken
    • Risk Assessment and Method Statement [RAMS], which is a mandatory requirement of the Health & Safety executive
    • Operatives certifications (copies)
    • Contractors Public and Employee liability Insurance (copy)
  • Your approval of these will demonstrate your compliance to our mutual environmental responsibilities

Documentation upon completion

You will be issued with the appropriate Waste Consignment Note, Waste Disposal Note or Duty of Care Note together with Gas-free certificates and copy of Industrial Disposal’s Waste Carriers license as applicable.

Fridges, Freezers, White Goods Disposal

Fridges, Freezers, White Goods Disposal

Boiler and Plant Dismantlers Ltd operate white goods / fridge freezer disposal services around the UK, but primarily in London, Essex, Kent, Surrey, Sussex, Bedfordshire, and Hertfordshire. Please contact us to discuss your fridge disposal requirements.

We collect Fridges Freezers and all Refrigeration devices from:

  • Residential premises
  • Small businesses
  • Corporate Companies
  • Local / Education Authorities
  • NHS Trusts

As licensed carriers of these hazardous wastes we offer a fast and efficient service in the uplifting of all fridges, freezers and air conditioning units for transportation to licensed sites for degassing and recycling.

The regulations concerning this are generally covered by the  EC Directive on Waste Electrical and Electronic Equipment (WEEE). These regulations aim to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and reducing the amount of waste going to landfill.

(The Department of Trade and Industry (DTI) , Department for Business Enterprise & Regulatory Reform (BERR) and the Department for Environment, Food and Rural Affairs (DEFRA) provide further information and advice surrounding the regulations as well as waste disposal of fridges and freezers.)

How can I tell if a fridge/freezer contains ozone depleting substances (ODS)?

The age of the appliance is in general an important determinant:

  • prior to 1994 almost all appliances used CFCs as both refrigerant (CFC R12) and as foam blowing agent (CFC R11);
  • after 1994 these were mainly replaced with HFC as refrigerant (R134a) and HCFC foam blowing agent (R141b or R142b/R22);
  • modern fridges are generally manufactured using HFC (R134a) or hydrocarbon (HC600a) refrigerants and hydrocarbon blowing agents.

Most fridges are also marked with an ‘appliance rating plate’ –  a metal plate or sticky label which is found on the back of the appliance.

The plate contains information about the appliance, for example model and serial number. In most cases it will also state what refrigerant was used in the appliance.

Fridges that are marked with R12 or R134a on the plate will most probably have CFC or HCFC in the insulation foam and should be treated accordingly, unless there is evidence to suggest otherwise.

For more information go to: http://www.defra.gov.uk.

Contact us for your one-stop solution

Wherever you are located in the UK, you will find that our efficient system is simple and easy to use.

  • Call us on 020 7183 3222 to arrange a site visit with one of our engineers to discuss your requirements
  • Following the meeting we will provide you with our:
    • quotation outlining the methods of works and price breakdown
    • Risk Assessment and Method Statement [RAMS], which is a mandatory requirement of the Health & Safety executive
    • Operatives certifications (copies)
    • Contractors Public and Employee liability Insurance (copy)
  • Your approval of these will demonstrate your compliance to our mutual environmental responsibilities